Mopar Authorized Distributor

Shop HEMI Parts Shop HEMI Parts Shop By Brand Arrington Partners Customer Builds

Presented by Arrington Performance

0 Items In Cart | SubTotal: $0.00 | View Cart

Arrington HEMI Engines

Arrington Performance HEMI Engines are known for their power and reliability. You can start with one of our standard blocks (forged 392, forged 345, 426 stroker) or get one built just for your application. The Arrington engine builders pour all of their NASCAR engine building knowledge into each HEMI engine they produce. Short block, long block, or full crate engines let you choose from a variety of setups.

Popular and Easy HEMI Mods

Just getting started? These categories are the "getting started" list for modifying your modern HEMI engine. Some are appearance oriented and some are for performance. There is something for every HEMI owner here.

Gifts For HEMI Enthusiasts

Browse our collection of "getting started" add-ons and gift items for any HEMI enthusiast.

HEMI Power Adders

Power adders force more power from your HEMI power plant. These HEMI power adders are designed and engineered for your specific application. Look no further if you want to add Towing Power to your Ram 1500, you commute in your Dodge Charger everyday, or race your Dodge Challenger on the weekends.

HEMI Bolt On Performance Parts

Bolt on increased horsepower and torque without invasive modifications to your HEMI engine with simple upgrades that increase the horsepower of your engine in as little as fifteen minutes and provide reliable power. Try out an API signature throttle body and cold air intake combination or upgrade the exhaust system to unleash the HEMI's classic muscle car sound.

HEMI Engine Performance Parts

Add performance parts to your mild to wild engine build to get the horsepower you want. Arrington selects and sells only the parts that offer you reliable performance for your HEMI engine. These parts will allow you to complete your build or eke out the extra torque you need to win.

Suspension And Wheels

Getting power to the ground and smoothing out the ride of your performance LX or LC all comes down to the suspension and tires. Lower the profile of your Challenger with a set of coil overs and wheels and tires or Improve the steering and driving characteristics of your ride with a strut brace and new set of bushings.

Transmissions

Replace a worn out clutch, upgrade to a race inspired higher stall torque converter to transfer the power from your new HEMI to your drivetrain more efficiently. Upgrade your NAG1 Transmission to withstand the power of your HEMI stroker engine.

Driveshafts & Axles

When increasing the power of your HEMI don't forget to upgrade your axles and rear end to withstand the higher torque and horsepower output. With an upgraded driveshaft or axle assembly you can safely transfer the horsepower from your transmission to the tires.

Appearance

Look no further to upgrade the class of your HEMI powered ride. Dress up your HEMI engine bay with billet cap covers or add chrome accents to your interior. Want to decrease weight with a carbon fiber deck lid and hood? Look no further. Get show quality finishes and the custom fit you want the first time with API's selection of HEMI Appearance products.

HEMI Transplant and Restoration Mods

Looking for a Jeep Wrangler HEMI conversion or want to add a Gen III HEMI to your classic muscle car? Arrington Performance has you covered. From a Carburetor conversion for your HEMI to a complete ready to rock HEMI crate engine you can get your parts here.

Fuel Systems and Oiling Components

Going lean? When you increase the air volume or add a power adder to your HEMI you need to add more fuel too! Check out these fuel systems and Oiling system components to keep your Air/Fuel ratio right and your HEMI engine clean and well lubricated.

Racing and Safety Equipment

Anyone headed to the track knows that staying safe is not only a want but also required by some class regulations. Get the stopping power you want with an upgraded set of brakes or get the safety you need to run in a high speed class like a roll cage, engine diaper, or driveshaft safety loop.

Calibration, Gauges and Electronics

HEMI engine tuning and handhelds are used to address not only drivability issues but to properly calibrate your ECU and TCM to run correctly with installed performance parts. Already have a calibration? Install a boost or air/fuel gauge to monitor your HEMI engine's stats in real time.

DId you know about our Hellcat 426 short block?
Need 1000HP? - here you go.

TRAKit at Ultimate Street
Car Challenge in NOLA!
Arrington Powered.

Arrington Performance

Weld Racing S71 18 in HEMI SRT-8 Challenger / LX Polished Rim

Click here to view larger image

MSRP:$1,250.00

SKU:WLD-VARIES

Dimensions:30X20X20

Weight:30.0 lbs

Installation Skill Rating:

Difficulty is 2.50 out of 5

Difficulty is 2.50 out of 5

Difficulty is 2.50 out of 5

Difficulty is 2.50 out of 5

Difficulty is 2.50 out of 5

Difficulty is 2.50 out of 5

Difficulty is 2.50 out of 5

Difficulty is 2.50 out of 5

Difficulty is 2.50 out of 5

Difficulty is 2.50 out of 5

Manufacturer:Weld Racing

Base Price: $1,250.00

Price with Options: $1,250.00

Please select the available options below.

Options with an (*) are required.
Once you have filled in all the required options and pressed the Update Options button you will be able to add this item into your shopping cart.

S71 18" Polished Rim

If you have been looking for the perfect wheel fitment with a 5x115 bolt pattern for your 6.1L SRT8 Challenger, Charger, Magnum, or 300C; take a look at these S71 rims by Weld Racing. These specific models have been test fitted to fit the SRT-8 model LX and Challenger. Each Polished S71 Weld Racing rim features a 3 piece cold-forged and welded construction, which makes it lighter and stronger than cast aluminium wheels. The RT-S S71 gives you a classy Weld Racing 5-spoke polished star look with a brilliantly polished show finish. Comes in 18x5, 18x7, 18x9, and 18x10.

Specs

SAE J2530 Aftermarket Wheel (Street) Standards
Center is available in polished or black anodized
Wheel widths from 4.5" to 18" with a wide variety of back spacings
Load rating of 1580 lbs per wheel (3160 lbs per axle)
Requires conical lugs
Center cap and valve stem included
Made in Kansas City, USA

Fits

Challenger 6.1L LC 2008 to 2010
Chrysler 300 6.1L LX 2005 to 2010
Dodge Charger 6.1L LX 2006 to 2010
Dodge Magnum 6.1L LX 2005 to 2010

Additional Options:

Add To Wishlist

Share:

Popular HEMI Performance Parts:

Copyright © 2013 - 2015 Connects Marketing, LLC - Arrington Performance. All Rights Reserved