Mopar Performance

2003 5.7L Belt Tensioner 

Official 392 HEMI Decal Kit by MOPAR. This kit includes an official 392 HEMI Decal, Insruction sheet and a performance decal applicator. Finish your restoration project with only official MOPAR performance parts from shopHEMI.com powered by Arrington Engines. 

5.7L HEMI OEM MOPAR Serpentine Belt 

5.7/6.1L Car Coil 

5.7/6.1L Thermostat 

5.7L / 6.1L Car Stock Throttle Body 

5.7L Car Stock Fuel Injector 

5.7L Crate Motor Carbureted Single Plane Intake Manifold, Small Plenum, Aluminum. Drilled with the standard Holley pattern. 

5.7L Crate Motor EFI Single Plane Intake Manifold, Low Rise, Small Plenum, Aluminum. Drilled with the standard Holley pattern. 

2009 - 2016 5.7L Drivers Side Stock Replacement Head.  

2009 - 2016 5.7L Driver Side Stock Replacement Head 

5.7L Stock Car Dampner 

5.7L Truck Dampner 

5.7L Truck Stock Fuel Injector 

5.7L Truck Throttle Body for 2005-2006 Trucks. 2003-2005 Trucks See Kit Options - 257.99 

This 6.1 HEMI Emblem by MOPAR can be found on the SRT8 Challenger Dual snorkel hood (2 reqired for Challenger Hood). Use this OEM hood emblem to accent your performance vehicle- it may be used on a Charger, Magnum, 300c, or Jeep. On the streets or on the drag strip let your competition know that it's got a HEMI. 

6.1 HEMI OEM MOPAR Serpentine Belt 

6.1 Stock Valve Locks (32 Required) 

6.1L Car Stock Fuel Injector (8 Required) 

2006 - 2010 6.1L Hemi Drivers Side Stock Replacement Head  

Mopar HEMI 6.1 Intake Manifold:  Adding a Mopar 6.1L intake manifold to your 5.7L HEMI engine will increase its horsepower and torque. This is a bare Manifold only. You will need injectors, fuel rails, throttle body, gaskets and map sensor to make this a complete item.  

2006 - 2010 6.1L Passenger Side Stock Replacement Head 

6.1L Stock Car Dampner 

6.1L Stock Exhaust Valve Springs (8 Required) 

6.1L Stock Intake Valve Springs (8 Required) 

6.1L Timing Set 

2011-2016 6.4L Hemi Drivers Side Stock Replacement Head  

2011-2016 6.4L Hemi Passsenger Side Stock Head  

5.7 / 6.1L Main Bearing 

5.7 6.1L Block Oil Plug 

5.7 / 6.1L Main Bearing 

5.7 / 6.1L Block Cam Plug 

Challenger Door Plates: A pair of door sill guards, like these help protect the interior door sills from scratches and improve the looks of your new Challenger. Comes in brushed stainless steel and proudly features the "Challenger" vehicle logo. This is a genuine Dodge Challenger performance accessory. 

Challenger Trunk Mat  This Dodge LC trunk liner is a nice way to improve the look and fell of your trunk. Comes in "Dark Slate Gray" and has Challenger stitched in the middle. As you would expect from a genuine Mopar accessory, this HEMI part is built from premium quality materials and was constructed with top notch workmanship.  

Mopar Inner Rear Axle SealThe 68014931AA is a inner rear axle seal for both R/T and SRT-8 Dodge Challengers. It seals where the axle shaft attaches to the differential on the rear carrier. Two seals are required(one for each side). 

R/T Grille EmblemDress up your SE or HEMI Dodge Challenger with this classic red Mopar R/T badge. The part has alignment tabs molded into the back to aid in installation.  

R/T Grille Emblem Dress up your SE or HEMI Dodge, Chrysler, Jeep with this classic red Mopar R/T badge. It can also be used on other areas of your Challenger or other vehicle, such as the rear deck lid or front quarter panel.   

R/T Spoiler EmblemDress up your SE or HEMI Dodge Challenger with this classic red Mopar R/T spoiler badge. Looks great on the rear deck lid / spoiler area of any Challenger.    

Super Bee EmblemIf you are a fan of the Dodge Challenger Super Bee Edition you know that this is the OEM Mopar badge found on the front fender. Now you can personalize your R/T or SE V6 with this emblem(or just replace a broken one). Some guys even get these to stick around their garage walls. Price is for one bee- this one is for the left side. 

Super Bee EmblemIf you are a fan of the Dodge Challenger Super Bee Edition you know that this is the OEM Mopar badge found on the front fender. Now you can personalize your R/T or SE V6 with this emblem(or just replace a broken one). Some guys even get these to stick around their garage walls. Price is for one bee- this one is for the right side. 

Old School Emblem  Do you have a new Challenger, but favor the old school script on the classic Mopar badges- then this Challenger script emblem is for you. This HEMI parts makes a strong statement on any late model LC muscle car. 

Converts SE / RT to SRT-8 Functional Scoops:  If you want to take out the non functioning hood intake scoops on your V6 SE or 5.7 RT and replace them with working ones like the SRT-8's have. This kit will do the trick! It also works with as replacement scoops for your SRT8 Challenger hood. This Mopar kit includes the OEM Challenger SRT8 scoops- both for the left and right.  

Dodge Challenger and LX Mopar Strut Tower Bar  These Mopar hood struts allow Challenger SE and RT owners to show off their engine bay without using a hood prop. Creates a cleaner look and dresses up any 5.7L HEMI or V6 engine bay. Installs in minutes and includes two gas charged struts, two mounting studs, and installation instructions.  

5.7L HEMI Water pump for 03-08 Dodge Ram HEMI. 

 LX SRT-8 Mopar Intake: This Mopar Performance cold air intake 77060006AB kit will reduce your intake air temperature and increase intake manifold pressure. Makes a quick bolt-on to gain horsepower and increase MPG. Fits LX 6.1L SRT-8 models. 

5.7 / 6.1L Head Dowel Pins 

6.1L Stock Exhaust Valve 

Front Sump Oil Pickup Tube 

Dodge Challenger and LX Mopar Strut Tower Bar  Mopar's strut tower bar for the 5.7 and 6.1 HEMI Challenger, Charger, Magnum, and 300c is made from heavy gauge MIG-welded steel and powder-coated in silver. It will improve your cars handling and stiffen your chassis by tying the front strut tower together- thereby reducing body roll. At the center of this anti roll bar is a blue Mopar logo.  

HEMI Ram Emblem  The HEMI 5.7 Liter emblem is factory equipment on Dodge Ram trucks of the same displacement, but the badge may be used on any Mopar ride. This part lets everyone know that your vehicle is packing a HEMI.  

6.1L Stock Intake Valve 

 Jeep SRT-8 Mopar Intake: This Mopar Performance cold air intake 77060011AB kit will reduce your intake air temperature and increase intake manifold pressure. Makes a quick bolt-on to gain horsepower and increase MPG. Fits Jeep 6.1L SRT-8 models. 

IAT Sensor Guard against gas theft and potential contamination with this locking HEMI gas cap by Mopar Performance. Will fit 2005 and up Chrysler 300c, Dodge Charger, Challenger, and Magnum. This kit includes a locking cap and two keys. Mopar / OEM PN 5278655AB. 

5.7 6.1L Main Bearings 

Mopar Oil FilterMOPAR oil filter 5281090 fits 2005-2007 and newer HEMI 5.7L and 6.1L Challengers, Chargers, Magnums, and Chrysler 300c with the 3/4" SAE thread fitting.NOTE: This only fits 2005-2007 with the SAE 3/4" thread fitting. 

Mopar Oil FilterMOPAR oil filter 4884899AB fits 2008 and newer HEMI 5.7L and 6.1L Challengers, Chargers, Magnums, and Chrysler 300c with the M22 by 1.5 metric thread fitting.NOTE: This only fits 2008+ with the M22x1.5 thread fitting. 

Ram 2500 Cat-Back: Mopar's P5155926 is a Cat-Back Exhaust System, with Single Side Exit wi Twin 4" Pro-Series Tips for the 2010-11 Ram 2500, 5.7L HD, Crew Cab, 6.4' Bed. It comes with a Limited Lifetime Warranty, bolt-on installation, 304L stainless steel construction, RSC technology, and straight-through design. The included RSC(Reflective Sound Cancellation) technology eliminates interior drone. 

Ram 2500 Cat-Back: Mopar's P5155928 is a Cat-Back Exhaust System, with Single Side Exit wi Twin 4" Pro-Series Tips for the 2010-11 Ram 2500, 5.7L HD, Crew Cab, 8' Bed. It comes with a Limited Lifetime Warranty, bolt-on installation, 304L stainless steel construction, RSC technology, and straight-through design. The included RSC(Reflective Sound Cancellation) technology eliminates interior drone. 

Ram 2500 Cat-Back: Mopar's P5155927 is a Cat-Back Exhaust System, with Single Side Exit wi Twin 4" Pro-Series Tips for the 2010-11 Ram 2500, 5.7L HD, Mega Cab, 6.4' Bed. It comes with a Limited Lifetime Warranty, bolt-on installation, 304L stainless steel construction, RSC technology, and straight-through design. The included RSC(Reflective Sound Cancellation) technology eliminates interior drone. 

Ram 2500 Cat-Back: Mopar's P5155924 is a Cat-Back Exhaust System, with Single Side Exit wi Twin 4" Pro-Series Tips for the 2010-11 Ram 2500, 5.7L HD, Regular Cab, 8.0' Bed. It comes with a Limited Lifetime Warranty, bolt-on installation, 304L stainless steel construction, RSC technology, and straight-through design. The included RSC(Reflective Sound Cancellation) technology eliminates interior drone. 

 Mopar 2011 5.7L Cat-Back: Mopar's P5155960 is a Cat-Back Exhaust System, with Dual Rear Exit w/ 4.5" Pro-Series Tips for the 2011 Chrysler 300c 5.7L HEMI (Automatic). It comes with a Limited Lifetime Warranty, bolt-on installation, 304L stainless steel construction, RSC technology, and straight-through design. The included RSC(Reflective Sound Cancellation) technology eliminates interior drone. 

 Mopar 2011 5.7L Cat-Back: Mopar's P5155959 is a Cat-Back Exhaust System, with Dual Rear Exit w/ New GTX Tips for the 2011 Challenger 5.7L (Auto/Manual). It comes with a Limited Lifetime Warranty, bolt-on installation, 304L stainless steel construction, RSC technology, and straight-through design. The included RSC(Reflective Sound Cancellation) technology eliminates interior drone. 

 Mopar 2011 6.1L Cat-Back: Mopar's P5155956 is a Cat-Back Exhaust System, with Dual Rear Exit w/ New GTX Tips for the 2011 Challenger 6.1L SRT-8 (Automatic). It comes with a Limited Lifetime Warranty, bolt-on installation, 304L stainless steel construction, RSC technology, and straight-through design. The included RSC(Reflective Sound Cancellation) technology eliminates interior drone. 

 Mopar 2011 6.1L Cat-Back: Mopar's P5155957 is a Cat-Back Exhaust System, with Dual Rear Exit w/ New GTX Tips for the 2011 Dodge Challenger 6.1L SRT-8 (Manual). It comes with a Limited Lifetime Warranty, bolt-on installation, 304L stainless steel construction, RSC technology, and straight-through design. The included RSC(Reflective Sound Cancellation) technology eliminates interior drone. 

 Mopar 2011 5.7L Cat-Back: Mopar's P5155958 is a Cat-Back Exhaust System, with Dual Rear Exit with Quad 3.0" Pro-Series Tips for the 2011 Charger RlT (Automatic). It comes with a Limited Lifetime Warranty, bolt-on installation, 304L stainless steel construction, RSC technology, and straight-through design. The included RSC(Reflective Sound Cancellation) technology eliminates interior drone. 

2011 5.7L Jeep Cat-Back: Mopar's P5155931 is a Cat-Back Exhaust System, with Dual Rear Exit w/ 4" Pro-Series Tips for the 2011 Jeep Grand Cherokee 5.7L V8. It comes with a Limited Lifetime Warranty, bolt-on installation, 304L stainless steel construction, RSC technology, and straight-through design. The included RSC(Reflective Sound Cancellation) technology eliminates interior drone. 

2011 5.7L Jeep Cat-Back: Mopar's P5153453 is a Cat-Back Exhaust System, with Cat-Back Exhaust System, Dual Center Rear Exit w/ Twin 4" Pro-Series Tips for the 2011 Jeep Grand Cherokee 5.7L V8. It comes with a Limited Lifetime Warranty, bolt-on installation, 304L stainless steel construction, RSC technology, and straight-through design. The included RSC(Reflective Sound Cancellation) technology eliminates interior drone. 

Mopar 5.7L Head Gasket Stock (Left) 2003 - 2008 5.7l HEMI Engine 

5.7 Head Gasket Stock (Right)2003 - 2008 5.7L HEMI Engine 

5.7 Water Pump Gasket 

5.7L / 6.1L / 6.4L Valve Cover Gasket Set (2 Valve Cover O-Rings, 8 Spark Plug O-Ring) 

5.7L / 6.1L Water Pump Gasket 

These are the factory Mopar Exhaust Rockers w/ shafts and bolts for all GEN III HEMI engines. 

These are factory Mopar Intake Rockers w/ shafts and bolts for all GEN III HEMI heads. 

Factory Mopar V8 crate engine - complete, assembled engine. 5.7L rated 390HP. This is the same engine installed on OEM Chargers and Challengers with the R/T trim level. Ask us about upgrades that can be fitted to this engine before we send it out. 

Sold each. If ordering singles please specify left or right. Order 2 to receive a pair.If your headers are leaking replacing your 5.7L HEMI 2005-2008 header gaskets with OEM units is a good way to fix it. These Mopar exhaust manifold gaskets are much higher quality than the ones that come with most aftermarket headers. We recommend picking up a new set when installing a set of long tube or shorty headers. By using top quality Mopar gaskets you reduce the risk of developing an exhaust leak.... 

Mopar 5.7L Truck Oil Pan Gasket (Rear Sump) 

Mopar Stock 6.1L HEMI front sump oil pan gasket and windage tray.  

Factory Mopar V8 crate engine - complete, assembled engine. 6.4L rated 470HP. This is the same engine installed on OEM Chargers and Challengers with Scat Pack or SRT trim level.Ask us about upgrades that can be fitted to this engine before we send it out. 

Mopar P5155283 5.7 Catback Exhaust  Mopar Performance Challenger RT 5.7L Catback Exhaust System. Made by Borla for Mopar. Compatible with automatic transmission only. Mopar part number P5155283.  

Mopar Side Stripe Kit   For long-lasting appeal, the Body Decal Kits are constructed of fade- and weather-resistant Matte Black vinyl while showing off a heritage-inspired design. Mopar part number 82211880.  

This item is unavailable and is on a national Mopar back order. New Challenger Billet Aluminum Shift Knob Spruce up your new LC Dodge Challenger with this high quality Billet Aluminum T handle shift knob by Mopar. Comes complete with all the hardware you will need for a quick(direct fit) and professional looking installation. As you can see in the image, this HEMI part features the Mopar "M" logo, with "MOPAR" underneath. The 82211622 is compatible with automatic transmissions only. 

Mopar Rear Quarter Panel Stripe Kit   This Applique / Decal Kit will dress up the rear quarter panel of your new Dodge Challenger. Mopar part number 82211881.  

Mopar P5155151 6.1 Catback Exhaust  Mopar Performance Challenger SRT-8 6.1L Catback Exhaust System. Made by Corsa Performance for Mopar. Compatible with automatic transmission only. Mopar part number P5155151.  

Mopar Motor Mounts These OEM motor mounts by Mopar are standard equipment on the Dodge Challenger SRT-8 6.1L. The price is for one mount. They may be used as right or left hand sides.  

Mopar Side Stripe Kit   For long-lasting appeal, the Body Decal Kits are constructed of fade- and weather-resistant vinyl while showing off a heritage-inspired design. Mopar part number 68054601AA.  

Block Plug for Chrysler engines. 

Crank Key for Mopar engines. 

Mopar Performance Rear Spoiler: Mopar Performance rear wing provides an aero- dynamic enhancement and it also improves the looks of your new Challenger with its uncompromising presence. Comes in matte Black which can be painted to match body-color. Makes a great exterior performance improvement for the rear of any LC Challenger.  

4 Sets of the infamous Hellcat NON-MDS Lifters with Yokes ready to get put in your 5.7L, 6.1L, 6.2L, 6.4L HEMI Engine. *Comes with 16 individual lifters and 4 yokes. For individual sets, please email us. 

If your headers are leaking replacing your header gaskets with OEM units is a good way to fix it. These Mopar exhaust manifold gaskets are much higher quality than the ones that come with most aftermarket headers. We recommend picking up a new set when installing a set of long tube or shorty headers. By using top quality Mopar gaskets you reduce the risk of developing an exhaust leak. Can be used with JBA, Kooks, Dynatech, and other aftermarket headers.  

Front Cover Dowels (2 Required)  

Mopar Timing Case Cover Gasket 

NAG1 Filter Mopar / OEM PN 52108325AA NAG1 transmission oil filter. Please verify the correct Mopar part number before ordering. 

Stock Oil Pan Gasket w/ windage tray for 2006 - 2010 SRT-8 Jeeps 

Challenger Hood Pins Dress up your HEMI Dodge Challenger with a Hood Pin Kit from Mopar. Each kit contains all the necessary hardware and brackets to give your Challenger that custom classic muscle car look. This set has a black finish on the hood pin plates. All components are manufactured from Marine grade stainless steel. The powder coated hood pin mounting plates and PVC coated lanyards were designed to protect your LC's finish.  

Challenger Hood Pins Dress up your HEMI Dodge Challenger with a Hood Pin Kit from Mopar. Each kit contains all the necessary hardware and brackets to give your Challenger that custom classic muscle car look. This set has a chrome finish on the hood pin plates. All components are manufactured from Marine grade stainless steel. The powder coated hood pin mounting plates and PVC coated lanyards were designed to protect your LC's finish.   

IAT Sensor Mopar / OEM PN 4606487AB Intake Air Temperature Sensor for your HEMI powered Chrysler, Dodge, or Jeep. This sensor fits most or the LX, LC, and Jeep vehicles, but some models have a slightly different connector. Please verify the correct Mopar part number before ordering. 

IAT Sensor Mopar / OEM PN 56028364AA Intake Air Temperature Sensor for your HEMI powered Chrysler, Dodge, or Jeep. This sensor fits most or the LX, LC, and Jeep vehicles, but some models have a slightly different connector. Please verify the correct Mopar part number before ordering. 

SRT-8 Badge Add a SRT-8 badge to the rear of your HEMI powered 300c, Charger, Challenger, Jeep, or Magnum and let every one behind you know that its got a HEMI. Fits perfectly on the rear deck lid area of your Dodge, Chrysler, or Jeep. Mopar Performance PN 5029893AB. This is the same badge found on OEM 6.1L SRT8 vehicles.  

Mopar Valve Seal for Chrysler engines. 

Valve Seal for Mopar engines. 

Ram Hood Scoop Inserts Plastic non-functional integrated hood scoop inserts for above hood.  

5.7 6.1L Oil Filter Relocation Kit. 

Block Oil Plug Small 

Block Oil Plug Long 

5.7 6.1 MDS Plug 

Rear Sump Oil Tube 

Stock 6.1L Piston Rings 

5.7 / 6.1L Rod Bearing 

SRT Badge Add a SRT badge to the front grille of your HEMI powered 300c, Charger, Challenger, Jeep, or Magnum. A great addition to any Dodge, Chrysler, or Jeep. Mopar Performance PN 5030355AB. This is the same badge found on OEM 6.1L SRT8 vehicles.  

Mopar Pedals These MOPAR Pedal covers are designed to fit over your production pedals. Made of Stainless steel with Santoprene rubber inserts, these Pedal Covers are Made to last. Gas and Break pedal kit for 5-speed automatic only.NOTE: Will NOT fit vehicles with adjustable pedals. 

Stock 5.7L Camshaft Car 

Stock 5.7L Camshaft Truck 

Stock 6.1L Camshaft 

HEMI 6.1 Crank Shaft (Stock); Forged Steel (3.58 Stroke)  

Stock 6.1L Front Sump Oil Pan