Arrington Performance is moving to Brighton, Michigan!

All new installations will be performed at our shop in Brighton -- with the same great service and Mopar mastery. In the meantime, we know we have been hard to reach on the first try. Please be patient -- your business is important to us and we are getting back to those messages as quickly as we can.
The easiest way to make sure your message is captured is to email us at sales@shophemi.com. Thank you.

DId you know about our Hellcat 426 short block?
Need 1000HP? - here you go.
TRAKit at Ultimate Street
Car Challenge in NOLA!
Arrington Powered.

Watch the Arrington Performance Intro    

Moroso Jeep SRT-8 Catch Can

MSRP:$191.11
SKU:MOR-85482
Dimensions:12x10x10
Weight:1.0 lbs
Installation Skill Rating:
Moroso Performance Products, INC.
Price: $181.55
Quantity:
Jeep Oil Catch Can by Moroso 
Part 85482, is a custom oil separator for the Jeep SRT8 6.1L features a unique drain system, filter media and custom fit brackets to withstand the rigors of intense driving applications.

How a HEMI PCV System works
The  Positive Crankcase Ventilation or PCV system is designed to remove any excess fumes from the HEMI engine crankcase, if it did not, it might cause oil leaks or engine seal damage. The PCV system routes crankcase fumes into the intake manifold where they can be burned to eliminate harmful vehicle emissions. The PCV valve controls the amount of crankcase flow volume depending on the engine's load. With wide open throttle(when you floor it) more blow-by gases are produced, and thus the PCV system flows a greater volume oil vapor in to the intake manifold. The PCV valve also functions as a check valve to prevent intake manifold flow from reversing back into the crankcase when there is a backfire, or when there are periods of high manifold pressure (boost) due to forced induction such as turbocharger or supercharger applications. 

My Jeep has a PCV system, why buy a Moroso catch can?
Oil Catch cans collect the oil, moisture and blow-by gas that causes carbon and sludge build-up in the intake system and engine. Over time, sludge can decrease performance and damage expensive intake system elements like the throttle body or the MAFS (Mass Air Flow Sensor). Moroso’s oil catch can also maintains the air to fuel ratio preventing retarded timing, loss of power, and even detonation of your Performance engine. This bolt on upgrade keeps your HEMI Jeep performance parts clean even under the most grueling driving conditions.

Unfortunately, all catch cans are not high quality parts. Moroso’s oil catch can is designed with a patented washable filter media that provides the maximum filtration while not hindering airflow, unlike other catch cans that may restrict flow and decrease performance over time. This kit also and has a vent on the bottom of the can which allows for the optional attachment of a hose to the drain. For a custom installation a hose may be run through a hole in the belly pan.

An oil separator is an excellent eye catching engine accessory that gives your SUV the appearance and function of a race Jeep.
 
Fits
  • Jeep SRT-8 2006-2010
Specs
  • Complete billet construction
  • All assembly and mounting hardware
  • PCV hose
  • Can comes without the fittings
 
Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate)

There are no comments for this product.
 
Additional Options:
Share: